Jinan Moon Refrigeration,covering an area of 20,000 sqm land, is a manufacturer, designer and installer for cold room in Jinan City,China.
 |
| Quantity: | |
|---|---|
Model: EMR4030M5Z
Power supply: 380V/3Ph/50Hz
Refrigerant: R404A
Cooling capacity: 3 Hp
Application range: 0 to +10 °C
Cold room: 37 to 55 m³
Weight: 150 Kg
Unit dimensions: A(580 mm) B(1195 mm) C(1170 mm)
Unit+packing dimensions: A(1100 mm) B(1330 mm) C(1355 mm)
Panel cut dimensions: H(1110 mm) L(505 mm)
Featuring an automatic hot gas defrost and defrost water evaporation system, the overhead monoblock cooling unit can reduce energy consumption and support carbon neutrality efforts. The EMR4030M5Z model utilizes R404a refrigerant, known for its environmental friendliness and atmospheric protection. This unit is designed for cold rooms operating at temperatures from 0 to 10°C and is ceiling-mounted.
1) .Condensing unit and evaporator are all in one.
2) .Use Dixell temperature controller
- Hermetic compressor
- Automatic defrosting by hot gas
- Pre-charged with refrigerant
- Expansion by Thermostatic valve
- High performance optimized air flow in the evaporator
- One-piece polyurethane injected housing for evaporator
- Medium temperature and low temperature
- Ceiling-mounted installation
1) .Only dig a hole on the ceiling panel,then locate the monoblock inside the ceiling panel.No need connect copper pipes between condensing unit and evaporator.
2) .No need professional refrigeration engineer to install and run the unit,which can save your installation cost.
Model: EMR4030M5Z
Power supply: 380V/3Ph/50Hz
Refrigerant: R404A
Cooling capacity: 3 Hp
Application range: 0 to +10 °C
Cold room: 37 to 55 m³
Weight: 150 Kg
Unit dimensions: A(580 mm) B(1195 mm) C(1170 mm)
Unit+packing dimensions: A(1100 mm) B(1330 mm) C(1355 mm)
Panel cut dimensions: H(1110 mm) L(505 mm)
Featuring an automatic hot gas defrost and defrost water evaporation system, the overhead monoblock cooling unit can reduce energy consumption and support carbon neutrality efforts. The EMR4030M5Z model utilizes R404a refrigerant, known for its environmental friendliness and atmospheric protection. This unit is designed for cold rooms operating at temperatures from 0 to 10°C and is ceiling-mounted.
1) .Condensing unit and evaporator are all in one.
2) .Use Dixell temperature controller
- Hermetic compressor
- Automatic defrosting by hot gas
- Pre-charged with refrigerant
- Expansion by Thermostatic valve
- High performance optimized air flow in the evaporator
- One-piece polyurethane injected housing for evaporator
- Medium temperature and low temperature
- Ceiling-mounted installation
1) .Only dig a hole on the ceiling panel,then locate the monoblock inside the ceiling panel.No need connect copper pipes between condensing unit and evaporator.
2) .No need professional refrigeration engineer to install and run the unit,which can save your installation cost.
